Your Collector Climate Card. Keep this with your humidor. It's the short version of our full setup guide, and following it is all the 30-Day Humidity Promise asks of you.
Target settings
| What | Set it to | Why |
|---|---|---|
| Humidity | 65–70% (65% if you mostly smoke within months; 68–70% for long aging) | Above 72% risks mold and beetles; below 62% dries the wrapper. |
| Temperature | 65–68°F | Tobacco beetle eggs can hatch above about 72°F. |
| Water | Distilled only | Tap water minerals clog humidifiers and feed mold. |
Day 1: setup (electric humidor)
- Let it stand upright for the time the manual specifies before plugging it in, so the compressor oil settles after shipping.
- Test your hygrometer with the salt test: a bottle cap of damp table salt and the hygrometer in a sealed bag for 8+ hours should read 75%. Note the difference and correct every reading by it.
- Fill the reservoir with distilled water, set temperature and humidity, and run it empty until readings hold steady for a day or two.
- Add cigars in stages over a week, not all at once. Dry cigars release or absorb moisture and swing the readings.
Routine
| When | Do this |
|---|---|
| Weekly | Glance at the display and your hygrometer. Top up distilled water. |
| Every 2 months | Empty and clean the water reservoir (mild vinegar solution, rinse with distilled water). |
| Every 3–6 months | Repeat the salt test. Check that door seals close evenly. |
| Summer | Keep the room cool. If the cabinet runs near 70°F, lower the set temperature. |
If something looks wrong
- Humidity won't hold 65–72% in the first 30 days after delivery: call us at (985) 531-8513. We troubleshoot it with you and ship the part it needs at our cost.
- White or green fuzz on cigars or wood: lower humidity, isolate affected cigars and see our guides on mold vs. plume.
- Tiny round holes in wrappers: possible tobacco beetles. Freeze affected cigars (see our beetle guide) and check the temperature.
- Electronics fault: don't open the unit. Email us a photo of the display and your order number. We handle the warranty claim with the maker.
Questions anytime: reply to any of our emails or call a real person at (985) 531-8513.